Elevate efficiency by running more samples and multiple chemistries simultaneously with the new Simultaneous Injection AS Autosampler.

• Improve efficiency by running two applications with one sample injection
• Twice the throughput compared to conventional modes of automation
• Two operational modes: "simultaneous" and "conventional"
• Minimize errors associated with multiple vial handling
• Single-sample application flexibility
• Integrated Chromeleon^® Support
• Fully supported under Dionex Validation
  

Improve Efficiency by Running Two Applications with One Sample Injection

The Simultaneous Injection AS Autosampler can independently control injection valves on two independent systems. Both systems then perform the required analysis and the results are reported to Chromeleon. Essentially, two independent IC systems are controlled and sampled with one autosampler. Using an ICS-3000 and an additional divertor valve, sequential injection adds the flexibility and control of adding sample only to one channel.  Sequential injection gives greater flexibility for limited sample amounts but also provides sample injection overlap.  In either scenario, one autosampler is shared between two systems. 

Twice the Throughput Compared to Conventional Modes of Automation

Simultaneous injection doubles your analytical power. Achieve higher sample throughput and eliminate errors associated with multiple operators and sampling locations. Simultaneous injection is fully controllable using Chromeleon.

Two Operational Modes: "Simultaneous" and "Conventional"

The Simultaneous Injection AS can be used in either mode to provide the greatest flexibility and capability to your laboratory operation. In simultaneous mode, take advantage of high throughput with two-system operation. In conventional mode, run samples the traditional way on a single system. Either way, let automation free up your analysts for other tasks while sample analysis on the IC runs quickly and independently.

Minimize Errors Associated with Multiple Vial Handling

Improve throughput and quality by eliminating errors associated with multiple operators and sampling locations. The Simultaneous Injection AS ensures that each sample is correctly and accurately delivered to accomplish the separation you need.

Single-Sample Application Flexibility

An example of this setup is the analysis of a drinking water sample for both cations and anions. In this example, the Simultaneous Injection AS is used to deliver sample to the two IC systems for analysis of both cations and anions, simultaneously. This capability allows system control of the injection valves independently for calibrations and simultaneously for unknown sample injections. In addition, the AS supports applications such as concentrator work for high sample volumes, as well as high- and low-concentration sample analysis in one run.

Integrated Chromeleon Support

Chromeleon simplifies reporting by allowing you to collect data from both systems. Calibration and result data are quickly and easily summarized in one view for full analyte disclosure.

Fully Supported Under Dionex Validation

The Simultaneous Injection AS Autosampler is fully supported by Dionex validation protocols to ensure that regulatory compliance is met. Simultaneous injection is supported by the ICS-900, ICS-1000, ICS-1500, ICS-2000, and ICS-3000. The ICS-2500 does not currently support simultaneous injection.