| | | | AS Autosampler |
| The Dionex ICS-3000TM AS Autosampler provides flexibility, high precision, reliability, ruggedness, and ease of use. Automation has never been more powerful. Free up your schedule and lab time with automated sample handling for your IC. Improve productivity and throughput with innovative, simultaneous, and sequential sampling modes. Improve your results with automated sample preparation. Eliminate complex laboratory procedures with automated standard preparation.
Key Features Provide Performance and Versatility Perform full loop, partial loop, limited sample, sample preparation, sample dilution, pre-column derivatization, matrix elimination, sample pre-concentration, and more. Consistent operation at RSDs of less than 0.3% Specially designed 10-mL polystyrene sample vials with wide openings that are easy to fill, easy to handle, and permit large-volume injections Well Plate ready for limited sample and high through-put applciations. Easy access to components for effective troubleshooting All-PEEK flow paths that ensure compatibility with aqueous and reversed-phase eluents and protect sensitive samples from metallic contamination Control through Chromeleon®, or module front panel Moving-needle design to guarantee reliable sampling from a variety of vial sizes Easy syringe priming Sample Prep option that saves time and labor by automating your sample and standard preparations - Sample tray temperature control option for thermally sensitive samples that offers precise, reliable control over a temperature range of 4–60 °C
Learn how the AS autosampler will improve the productivity of your laboratory in "Techniques to Increase Sample Throughput and Productivity", in the November 2005 issue of LCGC The Peak magazine.
| | | AS Autosampler Specifications | | Sample capacity | 10 mL vials - 49 Samples 1.5 and 2.0 mL vials - 99 Samples Well Plates (tray holds two well plates) - 96 Samples per plate for a total of 192 Samples | | Vial size | 10-mL polystyrene vials 1.5-mL glass vials 0.3 mL and 1.5 mL Polypropylene vials 0.45, 0.5 and 2.0 mL Well Plates | | Number of injections per vial | 1–99 | | Minimum sample volume | 10 µL can be sampled from a 300-µL microvial 20 µL can be sampled from 500 µL in a 10-mL vial | | Variable volume range | 1–100 µL in 0.1-µL increments 100–1000 µL in 1-µL increments | | Injection valve | PEEK Rheodyne with Tefzel® rotor seal | | Injection loop size | 25-µL standard; other sizes available | | Injection precision | Fixed loop <0.3% RSD at 20 µL or greater; variable <0.5% RSD at 20 µL | | Dilution precision | <1.0% RSD for a 1:100 dilution | | Dispensing precision | <0.2% RSD by weighing | | Carryover | <0.01% with 500-µL flush volume | | Ambient temperature range | 10–40 °C | | Humidity range | 10–90% relative humidity, noncondensing | | Sample Modes | Full-loop, Partial loop, Limited Sample partial loop, Simultaneous Injection, Sequential, Sequential Concentrate |
| | Order Information | | AS Autosampler, Base Configuration | 063102 | | AS Autosampler, with Sample Preparation Option | 063103 | | AS Autosampler, with Sample Tray Temperature Control Option | 063106 | | AS Autosampler, with Sample Prep and Tray Temp Control Options | 063107 | | AS Autosampler, with Injection Valve | 061786 | | AS Autosampler, with Injection Valve and Sample Tray Temperature Control | 061788 | | AS Autosampler, Simultaneous Injection Configuration without Valves | 063104 | | AS Autosampler, Simultaneous Injection with Sample Prep Option | 063105 | | AS Autosampler, Simultaneous Injection Configuration with Internal Valves | 063101 | | AS Autosampler, Simultaneous Injection Configuration with Internal Valves and Sample Prep Option | 063100 |
| |
|
|  |  |
