Using the ASE® Solvent Controller, you can reduce exposure to solvent and solvent vapors by pouring your solvents just once and then programming the desired solvent mixture from your ASE 200 or ASE 300.
Allows unattended, automatic switching between solvents.
Solvent is delivered from one to four reservoirs with mixing from 5% to 95% of total volume.
Reduces operator exposure to solvents by eliminating frequent solvent bottle changes between different sample types.
Solvent caddy holds up to four 1-L or 2-L bottles, and its reservoir contains and directs spills to waste.
The ASE Solvent Controller is directly programmable from ASE 200 or ASE 300.
Multiple extractions can be performed using any combination of solvent sources.
Alternate solvents can be used for rinsing the system.
Time and safety are important in most analytical laboratories. The ASE Solvent Controller provides convenience and flexibility to method development and routine operation. The solvent controller is an easy-to-use, add-on module compatible with the ASE 200 or ASE 300.
The solvent controller is an ideal system addition, both for users developing new methods and those who must run many different types of analysis on a routine basis. The solvent controller allows mixing of up to four different solvents from 5 to 95% total volume, which is directly delivered to the ASE 200 or ASE 300.
The ASE Solvent Controller reduces operator exposure to solvent and solvent vapors and reduces cumbersome solvent pouring.
