|
| | | DX-80 Standards and Reagents | | Start-Up and Refill Kits for DX-80 eluent, regenerant, and standard reagents provide fast, easy reagent preparation. DX-80 installation and operation is effortless using the DX-80 Reagent Kits. All reagents and standards ship with complete quality assurance data. Standards are NIST-traceable. Standard concentrations are verified by two independent methods. DX-80 Anion-1 Reagent Start-Up Kit contains: 1 bottle of AS14A Eluent Concentrate, 1 bottle of Anion Regenerant Concentrate, 1 bottle of Combined Seven Anion Standard II DX-80 Anion-1 Reagent Refill Kit contains: 4 bottles of AS14A Eluent Concentrate, 4 bottles of Anion Regenerant Concentrate DX-80 Cation-1 Reagent Start-Up Kit contains: 1 bottle of CS12A Eluent Concentrate, 1 bottle of Cation Regenerant Concentrate, 1 bottle of Combined Six Cation Standard II DX-80 Cation-1 Reagent Refill Kit contains: 4 bottles of CS12A Eluent Concentrate, 4 bottles of Cation Regenerant Concentrate AS14A Sodium Carbonate/Bicarbonate Concentrate (100 mL): For use with the IonPac® AS14A-5µm (3 × 150 mm) column and DX-80 System. Concentration: 0.16 M Na2CO3 /0.02M NaHCO3 (20× concentrate). Available as a four-pack of the AS14A Eluent Concentrate (4 × 100 mL). CS12A Methanesulfonic Acid Concentrate (100 mL): For use with the IonPac CS12A-5µm (3 × 150 mm) column and DX-80 system. Concentration: 0.4 M MSA (20× concentrate). Available as a four-pack of CS12A Eluent Concentrate (4 × 100 mL). Anion Regenerant Concentrate (75 mL): 2.0 N H2SO4 (20× concentrate). Anion Regenerant Concentrate (4-pack, 4 × 75 mL): 2.0 N H2SO4 (20× concentrate). Cation Regenerant Solution (100 mL): 2.06 M TBAOH (20× concentrate). Cation Regenerant Solution (4-pack, 4 × 100 mL): 2.06 M TBAOH (20× concentrate). Combined Seven Anion Standard II (100 mL): Designed for routine anion determinations.Contains fluoride (20 mg/L); chloride (100 mg/L); nitrite (100 mg/L); bromide (100 mg/L); nitrate (100 mg/L); phosphate (200 mg/L); sulfate (100 mg/L). Combined Six Cation Standard II (50 mL): Designed for routine cation determinations. Contains: lithium, 50 mg/L; sodium, 200 mg/L; ammonium, 250 mg/L; potassium, 500 mg/L; magnesium, 250 mg/L; calcium, 500 mg/L.
| | DX-80 Standards and Reagents Specifications | | Dionex DX-80 Standards and Reagents | Dionex reagents are prepared by the dissolution of high-purity chemicals in >18.2 megohm deionized water, which was tested by ion chromatography for ionic contaminants. The bottle label states the nominal concentration value for informational purposes only. The actual concentration is within +2.5% and was determined by one or more of the following proven reliable methods of analysis such as ion chromatography, UV spectrophotometry (using NIST or USP Reference Material where applicable), titration (using NIST Reference Material), and gravimetric preparation. |
| | Order Information | | Combined Six Cation Standard-II, 50 mL | 046070 | | DX-80 Anion-1 Reagent Startup Kit | 057068 | | DX-80 Anion-1 Reagent Refill Kit | 057069 | | DX-80 Cation-1 Reagent Startup Kit | 057070 | | DX-80 Cation-1 Reagent Refill Kit | 057071 | | AS14A Eluent Concentrate (20x), 100 mL, Pkg of 4 | 057557 | | CS12A Eluent Concentrate (20x), 100 mL, Pkg of 4 | 057558 | | Anion Regenerant Concentrate (2.0 N H2SO4), 75 mL | 057559 | | AS14A Eluent Concentrate (20x), 100 mL | 057560 | | CS12A Eluent Concentrate (20x), 100 mL | 057562 | | Combined Seven Anion Standard II, 100 mL | 057590 |
| |
|
|  | |
