|
| | | IonPac UTAC-ULP1 Ultratrace Anion Concentrator Column--Ultra Low Pressure | | The UTAC-ULP1 Ultratrace Anion Concentrator Column is designed primarily for high purity water analysis. The UTAC-ULP1 strips ions from a measured volume of aqueous sample matrix, concentrating the analyte species thereby lowering detection limits. The UTAC-ULP1 is an ultra clean (low sulfate), concentrator column. The UTAC-ULP1 is a general purpose concentrator for use with syringe or autosampler loading. The UTAC-LP1 (4 x 35 mm) is an ultra low backpressure column and can be used with the AS40, AS50, or AS Autosamplers. The UTAC-ULP1 (5 x 23 mm) Concentrator Columns can be used with single piston sample delivery pumps including the DXP-1 and DQP pumps. The UTAC-ULP1 can be used with carbonate/bicarbonate, borate, and hydroxide eluents. The UTAC-ULP1 has a capacity of 25.0 µeq/column and a void volume of approximately 145 µL. The UTAC-ULP1 is available in 5 x 23 mm format.
| | IonPac UTAC-ULP1 Ultratrace Anion Concentrator Column--Ultra Low Pressure Specifications | | Dimensions: | IonPac UTAC-ULP1 Ultratrace Anion Concentrator Column--Ultra Low Pressure:
5 x 23 mm | | Mobile Phase Compatibility: | Hydroxide, carbonate/bicarbonate, or borate eluents; 1-100% HPLC solvents | | Substrate Characteristics: | Bead Diameter: 17 µm Crosslinking (%DVB): 55% | | Latex Characteristics: | Functional Group: Alkanol quaternary ammonium Latex Diameter: 85 nm Latex Crosslinking: 6% Hydrophobicity: Very Low | | Capacity: | 25 µeq/col | | Void Volume: | 145 µL |
| | Order Information | | UTAC-ULP1 Ultra Trace Anion Concentrator Ultralow Pressure (5 x 23 mm) | 063475 |
| |
|
|  |  | TAC-ULP1 Column |  | The IonPac® TAC-ULP1 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions. |
| TAC-LP1 Column | | The IonPac® TAC-LP1 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions. |
| TAC-2 Column | | The IonPac® TAC-2 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions. |
| AMC-1 Column |  | The AMC-1 concentrator column is designed for concentration of inorganic anions and low-molecular-weight organic anions. |
|
|
