IonPac CS5A Cation-Exchange Column

The IonPac CS5A is a high-resolution, ion-exchange column designed for the determination of transition and lanthanide metals in diverse sample matrices. The CS5A column, in combination with postcolumn derivitization and visible detection at 530 nm, provides a sensitive and selective method for transition metal analysis.

  • The CS5A column is recommended for the separation of transition and lanthanide metals.
  • The CS5A can also be used for aluminum analysis.

The CS5A column permits the simultaneous determination of common transition metals in less than 11 min using a unique bifunctional resin. The transition metals are detected following complexation with 4-(2-pyridylazo) resorcinol (PAR). The PAR derivative is detected at 520–530 nm. This method is very sensitive and selective for the transition metals. The CS5A provides improved selectivity and higher efficiencies than the CS5 column. Use the MetPacTM PDCA and Oxalic Acid Eluent Concentrates and PAR Postcolumn Reagent Diluent for simplified operation.

IonPac CS5A Cation-Exchange Column  Specifications
Dimensions

IonPac CS5A Analytical Column:
4 × 250 mm and 2 × 250 mm

IonPac CG5A Guard Column:
4 × 50 mm and 2 × 50 mm

Maximum operating pressure

(17.3 MPa) 2500 psi

Mobile phase compatibility

Typical HPLC solvents to 50%

Resin composition

Bead Diameter: 9 µm

Cross-Linking (%DVB): 55%

MicroBead™ latex

Bilayer of anion-exchange and cation-exchange latex

Anion exchange

Latex Diameter: 76 nm

Latex Cross-Linking: 2%

Capacity: 40 µeq/column (4 × 250 mm);
10 µeq/column (2 × 250 mm)

Ion-Exchange Group: Quaternary ammonium

Cation exchange

Latex Diameter: 140 nm

Latex Cross-Linking: 10%

Capacity: 20 µeq/column (4 × 250 mm);
5 µeq/column (2 × 250 mm)

Ion-Exchange Group: Sulfonic acid

Column construction

PEEK with 10-32 threaded ferrule-style end fittings. All components are nonmetallic.

Order Information
IonPac CS5A Analytical Column (4 x 250 mm) 046100
IonPac CG5A Guard Column (4 x 50 mm) 046104
IonPac CS5A Analytical Column (2 x 250 mm) 052576
IonPac CG5A Guard Column (2 x 50 mm) 052836
Data Sheets
IonPac CS5A Column and MetPac Reagents Data Sheet   184K
AN 131: Determination of Transition Metals at PPT Levels in High-Purity Water and SC2 (D-clean) Baths   110K
AN 108: Determination of Transition Metals in Serum and Whole Blood by Ion Chromatography   101K
IonPac CS5A Analytical Column Manual   348K
 
 
© 2008 Dionex Corporation. All rights reserved. www.dionex.com